GCE Zen-O Lite Portable Oxygen Concentrator - 2 Battery System
Zen-O lite™ is the new ultra-light portable oxygen concentrator from GCE Healthcare designed for active patients on long term oxygen therapy (LTOT), it is reliably quiet, some patients might even forget it’s there. Zen- O lite™ offers patients that require supplemental oxygen the ability to lead their lives independent and unrestricted.
Zen-O lite™ weighs 2.5 kg and can deliver up to 1050 ml of oxygen per minute in pulse mode and is supplied with variety of accessories, including an attractive carry bag, AC and DC power supply cables and a rucksack as an optional extra for increased mobility.
Zen-O lite™ provides oxygen on demand using advanced technology, a constant pulse size is delivered each time the user inhales.
Features
Pulse Mode, Up to 1050ml
Zen-O lite™ portable oxygen concentrator can deliver up to 1050ml of oxygen in pulse mode and has 5 flow settings.
Easy to use
Zen-O lite™ is simple to use with an intuitive button operation and LCD panel.
Breath Detection Indicator
The flashing indicator on your Zen-O lite™ concentrator assures the patient that oxygen is being delivered each time a breath is detected.
Replaceable sieve modules
Zen-O lite™ has a practical design which makes it easy for users or home oxygen providers to replace the sieve modules in under 5 minutes.
Visual and Audible Alarms
Zen-O lite™ has various audible and visual alarms to alert the user of a required action. Some alarms include low battery, service required, and no breath detected.
Quality and Global support
Zen-O lite™ portable oxygen concentrator is designed in the UK and assembled in the Czech Republic to relevant international standards. GCE has locations in United Sates, Latin America, China and multiple warehouses across Europe. Our strategic partners in Africa and the Middle east help us ensure accessories and spare parts are readily available to our customers.
Warranty
Zen-O lite™ is supplied with a 3 year device warranty, all accessories such as the bag, battery and sieve tubes are provided with a 1 year warranty.
Specifications
Size: 249 mm (W), 97 mm (D), 235 mm (H); 9.8" (W), 3.8" (D), 9.25" (H)
Unit weight: 2.5 kg (5.5 lbs) (without carry bag)
Power requirements: AC adaptor: 100-240V AC(+/- 10%); 50-60 Hz in, 24V DC, 5.0A out; DC adaptor: 11.5 - 16V DC in, 24V, 5.0A out. (Important: see accessories list for model and part numbers for AC and DC power supply packs.)
Purity: 87% - 96% at all flow rates, over operating conditions
Setting: User adjustable in 0.5 increments from 1.0 to 5.0
Inspiratory trigger sensitivity: -0.12cm/H20
Setting indicator: LCD
Maximum oxygen discharge pressure: 20.5 psi
Humidity range: 5% to 93% ± 2% non-condensing
Disconnect Device: Power supply input connector
Operating altitude: 0m to 4,000m (0′ to 13,000′) relative to sea level, 1060 down to 575 mbar
Sound level: Sound Pressure level of 37dBA at setting 2 and 18 BPM: (when measured at 1 m from front of device). Sound Pressure level of 48.7 dBA/Sound Power level of 56.7 dBA at setting 5
Type of protection (electrical): Class II
Degree of protection (electrical): Type BF
Degree of protection (water): IP22 in carry bag (protection against small objects and tilted dripping water). IP20 out of carry bag (protection against small objects and no protection against water entering the concentrator)
Degree of safety (flammable anesthetic mixture): Not suitable for use in the presence of a flammable anesthetic mixture
Operating temperature: Continuous operating at temperatures between 5°C (41°F) and 40°C (104°F).
Storage temperature: Between -20°C (-4°F) and 60°C (140°F).
Alarm sound pressure range: 68.1 to 69 dB(A)
Alarm system delays: Less than 10 seconds after detection (low oxygen alarms if oxygen is less than 82% volume fraction at specified environmental conditions)
Oxygen concentrator status indicator: High priority alarm that indicates when oxygen concentration drops below 82%
