The Plum A+® Infusion System is a stationary multi-channel pump with software and display features that have been designed to reduce drug administration errors and help promote safe and on-time delivery of medications. Launched in 2000, the Plum A+ calculates drug-appropriate doses, displays key programming information and provides a pre-infusion review of programmed medication infusion parameters for clinician confirmation.

PRODUCT SPECIFICATIONS

Physical Dimensions: 8" H x 8" W x 6" D, excluding pole clamp

Weight: 9.5 lbs. with battery

Casing: High-impact plastic

Delivery Rate Range

Lines A & B:
- 0.1-99.9 ml/hr in 0.1 ml increments
- 100-999 ml/hr in 1 ml increments

Concurrent Delivery: 0.5 ml/hr minimum for each line

PlumSet: 500 ml/hr cumulative (A+B) maximum

KVO: 1.0 ml/hr or the last primary delivery rate, whichever is less

VTBI Range:
- 0.1-99.9 ml in 0.1 ml increments
- 100-9999 ml in 1 ml increments

Electrical Power Requirements: 120V, 50-60 Hz, 35VA

Fuses: F1, F2, 250V, 0.5A

Power Cord: Hospital Grade AC Cord 10 ft long

Battery: One sealed lead acid, rechargeable 6V battery, internal

Battery Life: With a new fully charged battery, the infuser shall operate for a minimum of 6 hours at 125 ml/hr or less, or deliver 500 ml at 126 ml/hr or greater on one line

Recharge: The battery charges whenever the pump is connected to AC power. The recharge time is approximately 6 hours with the device operating at 125 ml/hr on one line