Philips Trilogy Evo Portable Ventilator
Philips home ventilator solutions offer invasive and noninvasive therapy for a wide range of adult and pediatric patients. These solutions feature advanced technology and user-friendly interfaces to help homecare providers, patients and caregivers navigate home respiratory care. Using Philips Care Orchestrator or Care Orchestrator Essence with their ventilation solutions helps to coordinate care teams and enable homecare providers to effectively monitor patients in the home environment.
Patient-friendly performance.
Trilogy Evo ventilators feature an easy-to-use touchscreen with patient-friendly displays. Onscreen help and alarm guidance aid user proficiency—making it easy for caregivers to rapidly feel confident using Trilogy Evo ventilators, and for respiratory patients to feel comfortable.
Simple: Easy-to-learn user interface, configurable to the care environment
Portable: 15 hours of battery life, easily mounts on wheelchairs, and has a convenient carrying bag that lets you see the screen and alarms
Specifications
Ventilation modes:
- A/C-PC: Assist control (pressure control)
- A/C-VC: Assist control (volume control)
- CPAP: Continuous positive airway pressure
- PSV: Pressure support ventilation
- S/T: Spontaneous/timed ventilation
- SIMV-PC: Synchronized intermittent mandatory ventilation (pressure control)
- SIMV-VC: Synchronized intermittent mandatory ventilation (volume control)
- AVAPS-AE
- MPV-PC: Mouthpiece ventilation (pressure control)
- MPV-VC: Mouthpiece ventilation (volume control)
Physical Specifications
Weight:
- 5.2 Kg (11.5 lbs) device
- 5.8 Kg (12.7 lbs) with detachable battery
- 6.3 Kg (13.8 lbs) with oxygen blender and detachable battery
- Size without oxygen blender: 16.5 cm D x 28.6 cm W x 24.5 cm H 6.48” D x 11.25” W x 9.65” H
- With oxygen blender: 19.3 cm D x 28.6 cm W x 24.5 cm H 7.6” D x 11.25” W x 9.65” H
- Screen dimensions: 8”, 20.32 cm
- Ingress protection IP22: protection against finger-sized objects and protected against dripping water when tilted up to 15 degrees.
Measured and displayed patient parameters
- Minute ventilation (MinVent) – 0 to 30 l/min
- Leak – 0 to 200 l/min
- Respiratory rate (RR) – 0 to 90 BPM
- Peak inspiratory fl ow (PIF) – 0 to 200 l/min
- Peak inspiratory pressure (PIP) – 0 to 90 cmH2O
- Mean airway pressure – 0 to 90 cmH2O
- Percentage spontaneous triggered breaths (%Spont Trig) – 0 to 100%
- I:E ratio – 9.9:1 to 1:9.9
- Dynamic compliance (Dyn C) – 1 to 100 ml/cmH2O
- Dynamic resistance (Dyn R) – 5 to 200 cmH2O/l/sec
- Dynamic plateau pressure (Dyn Pplat) – 0 to 90 cmH2O
- Auto-PEEP – 0 to 20 cmH2O
- FiO2 with FiO2 sensor – 21% to 100%
- SpO2 with pulse oximeter accessory – 0 to 100%
- Pulse rate with pulse oximeter accessory – 18 to 321 beats per minute
- EtCO2 with CO2 accessory – 0 to 150 mmHg
- AVAPS with passive circuit PSV, S/T, and A/C-PC modes only
- Tidal volume 35 – 2000 ml on Dual Limb and Active Flow circuits,
50 – 2000 ml on passive and active PAP circuits - Breath rate 0 – 80 BPM
- PEEP 0 – 35 cmH20 for active circuits
3 – 25 cmH20 for passive circuits - EPAP/CPAP 3 – 25 cmH20
- IPAP 3 – 60 cmH20
- Pressure support/pressure control 0 – 60 cmH20
- Inspiratory time 0.3 – 5.0s
- Rise time 0 – 6
- Triggering and cycling Off , AutoTrak, Sensitive AutoTrak, and Flow Trigger
- Flow trigger sensitivity 0.5 – 9 l/min
- Flow cycle sensitivity 10% – 90% of peak flow
- Flow pattern Square, Ramp
- FiO2 21% – 100%
- Inspiratory time min/max 0.3 – 3.0 sec
- Backup ventilation ON – OFF
